檢測認證人脈交流通訊錄
- Wind Power Testing Surface Plate Wind Power Testing Surface Plate is suitable for Wind power generation company as machining worktable. Material: The material of Cast Iron Testing Plate is high-strength cast iron HT200 and HT250. After two times’ artificial heat aging treatment( Artificial annealing temperature 600℃ to 700℃or 2-3 years natural aging) the internal stress was totally eliminated, so the surface plate have stable accuracy and good wear-resisting performance. Specification: 100*100—3000*6000( Special specification is availiable as per customers’ drawing) 風電試驗平臺精度:按國家標準計量檢定規程執行,分別為0,1,2,3四個等級. 相關產品:風電試驗臺,風力發電試驗平臺,風電試驗平臺 風電試驗臺制成筋板式和 箱體式,工作面有長方形,正方形或圓形,材料HT200-300,QT400-600,ZG15-45.工作面采用刮研工藝,工作面上可加工V形,T形,U形槽,燕尾槽,圓孔,長孔等.平板是用于工件檢測或劃線的平面基準量具.風電試驗臺安裝就調至水平板,負荷均勻分布于各支點上.環境溫度(20±5)℃.使用時應避免振動. Wind Powder Surface Plate can be made into rib type or box type and the working surface are typically square, rectangular or round and are allowed to machined V, T or U-shaped grooves and round holes or other holes. It is always used as the datum for measurement of the machinery parts’ geometric tolerance,such as flatness, parallelism, straightness and more. It is also can be used for precision inspection, marking out (layout), and tooling setup. The environment temperature (20 + / - 5 ℃. When using , vibration should be avoided.
關于檢測通 | 服務項目 | 合作中心 | 資訊投稿 | 媒體聚焦 | 聯系我們 | 客服中心 | 網站地圖 | 友情鏈接
Copyright ? 2010-2016 生意寶檢測通 版權所有.浙ICP備14007955號
浙公網安備 33010602010408號
地址：浙江省杭州市莫干山路187號易盛大廈12F 郵政編碼：310012
客服QQ:2804879579 檢測通QQ群:檢測資源-詢盤、人脈 319379593
-
檢測通手機版 
檢測通官方微信
檢測通QQ群