上海珩渥檢測技術服務有限公司

檢測通>> 上海珩渥檢測技術服務有限公司

首頁

公司簡介

熱門推薦

檢測認證人脈交流通訊錄

EU test requirement for e-bike 歐盟電動自行車標準
這真不是您需要的服務？

直接提問 | 回首頁搜
對應法規：EN 15194
CNAS認可項目：是

Test item 測試名稱:

EU test requirement for e-bike 歐盟電動自行車標準

Test info 測試內容：

Scope	This European Standard is intended to cover electrically power assisted cycles of a type which have a maximum continuous rated power of 0.25 kW, of which the output is progressively reduced and finally cut off as the vehicle reaches a speed of 25km/h, or sooner, if the cyclist stops pedaling, and assess the design and assembly of electrically power assisted bicycles and sub-assemblies for systems using battery voltage up to 48 VDC or integrated a battery charger with a 230 V input.
Clause	Test Items
4	Requirements 要求
4.1	General 一般要求
4.2	EPAC specific additional requirements電動助力自行車的特定附加要求
4.2.1	Electric circuit 電路要求
4.2.2.	Batteries 電池的要求
4.2.3	Electric cables and connections 電線和聯結
4.2.3.1	Requirements 要求
4.2.3.3	Wiring 布線
	Seperated battery charger
	Integrated battery charger
4.2.3.4	Power cables and conduits 電源線和導電管
	Supplier can provide IEC 60364-5-52 compliance report 供應商能提供符合報告
	Supplier can not provide IEC 60364-5-52 compliance report 供應商不能提供符合報告
4.2.3.5	External and internal electrical connections 內部和外部連接
	Supplier can provide IEC 60364-5-52 compliance report 供應商能提供符合報告
	Supplier can not provide IEC 60364-5-52 compliance report 供應商不能提供符合報告
4.2.3.6	Moisture resistance 防潮測試
4.2.3.7	Mechanical strength 機械強度
4.2.4	Power management 動力管理
4.2.5	Electro magnetic compatibility 電磁兼容
4.2.5.1	Emission 電磁干擾
4.2.5.2	Immunity 抗干擾能力
4.2.5.3	Battery charger 電池充電器
4.2.6	Maximum speed for which the electric motor gives assistance 輔助動力最大速度
4.2.7	Maximum power measurement 最大動力輸出
5	Marking and labelling 標簽
6	Instructions for use 使用說明書
Complete sample requirement 完整樣品要求
3 sets of fully assembled bicycle, 3 pcs of fork, 3 sets of frame & fork assembly, 3 set of handlebar & stem assembly, 1 set of crank assembly, 2 pcs of pedal, 3 pcs of luggage carrier with nuts (if applicable), 2 addtional pcs of fork for disc brake/hub brake, addtional 2 sets of motor, addtional 1 sets of battery, addtional 1 sets of charges, addtional 2 sets of other electric parts
整車3套,前叉3支,車架前叉組件3套,把橫管/把立管組件3套,曲柄組件1套,踩踏板2件,3件載物架帶螺母(若適用),額外2支前叉(輪轂閘或盤閘), 額外電機2套，額外電池1套，額外充電器1套，額外其他電氣原件2套。
Turnaround time: normal(30 working days)
工作天: 普通件( 30個工作天)
Non-Complete sample requirement (with 10-12 more working days): 4 sets of fully assembled bicycle, 4 pcs of brake pad (if applicable), 4 pcs of bell (if applicable), 2 pc of luggage carrier (if applicable)，1 sets of motor, 1 sets of battery, 1 sets of charges, 1 sets of other electric parts
不完整樣品要求 (工作天加長10-12天)：整車4套,閘皮4塊(若適用),車鈴4件(若適用),載物架2件(若適用),電機1套，電池1套，電器1套，其他電氣原件1套。

Others 其他信息:

上海珩渥檢測技術服務有限公司

張曼奕

[聯系時請說明來自檢測通]

在線客服:
留言咨詢

聯系方式：
請點擊查看電話

郵件：
發送郵件

地址：
上海市徐匯區天鑰橋路329號嘉匯國際B座517室

上海珩渥檢測技術服務有限公司

熱門推薦

EU test requirement for e-bike 歐盟電動自行車標準

推薦服務